- Home /
- 2.1A Foam System
Features
- 2.1GPM Piston Pump
- Computer controlled Class A foam proportioning at a value price
- Push button proportioning
- Arrow buttons allow changing foam percentage from 0.1% to 10.0%
- Digital control means the operator presses one button for precise foam delivery every time
- Available fully integrated onto a new Hale pump or in kits to fit other pump brands
- Wide range of flow sensor options from pipe saddle clamps to stainless steel weld-on fittings are available
Specifications
| Certification(ss) |
|
|---|---|
| Warranty | |
| Length | 16.4 inches (416 mm) |
| Width | 13.1 '' (333 mm) |
| Height | 6.9 '' (175 mm) |
| Flow (GPM) | 2.1 GPM |
| Flow (LPM) | 7.9 LPM |
| Amperage | 40 amps @ 12V, 20 amps @ 24V |
| Can Specification | J1939, 250kbit/s |
| Foam Pump | 0.44 HP |
Documents
| Name | Sheet # | |
|---|---|---|
 |
 SmartFOAM Bid Specification |
A |
Installation and Service Documents
Contact Us with Questions
Software Updates and Downloads
Contact Us with Questions
| Type | Description | Instructions | Version | Updated | File |
|---|---|---|---|---|---|
 |
2018-12-17 21:52:03 | |
|||
 |
Download Latest update to USB. Plug in USB Adapter to back of display with USB. Enter passcode: 2668 in the menu screen. Use Up and down arrows to find Update-SmartFOAM_1.XX.tar XX:LATEST REVISION (CHECK BACK HERE FOR UPDATES) Hit the right arrow twice to confirm and update. 1.21 functionality update: Moved water calibration to annual Set the maintenance interval to the foam unit run time. So if the unit isn't running the maintenance interval also doesn't run. 1.20 functionality updates: Added OEM menu item (2314 menu) to select style of 2nd pump (1.7, 2.1, 3.3, 5.0, etc). Updated limp home mode for secondary pump to use correct model. Allow piston pump models(1.7 and 2.1) to use prime button. These two pumps used to hide the prime button. Added auto enable in the OEM menu (2314 menu). When enabled, the system will turn ON when water flow is detected. This is defaulted to DISABLE. Update the “water flow buffering” value in the FACTORY menu – password 57643. Useful for turbulent flows condition for the water flowmeter. |
1.21 | 2019-04-30 00:50:57 | |
Product Updates and Media Files
| Description | Type | Size | |
|---|---|---|---|
 |
Foam and CAFS Brochure | |
n/a |
