Foam & CAFs

Class 1's 2.1A foam system is a flow based foam concentrate proportioning system that uses a field-proven flow sensor assembly to measure actual water flow from the fire pump discharge. The digital input of the flow sensor and the actual output of the positive displacement piston foam concentrate pump are constantly compared and updated by the controller which automatically adjusts the desired foam concentrate rate injected into the discharge. It has full function digital control with push button operation for ease of use. The digital foam system removes the traditional pressure restrictions of other foam systems so it is unaffected by hose length, flow rate, or pressures.

Class 1's 3.3 foam system is a flow based foam concentrate proportioning system that uses a field-proven flow sensor assembly to measure actual water flow from the fire pump discharge. The digital input of the flow sensor and the actual output of the positive displacement rotary gear foam concentrate pump are constantly compared and updated by the controller which automatically adjusts the desired foam concentrate rate injected into the discharge. It has full function digital control with push button operation for ease of use. The digital foam system removes the traditional pressure restrictions of other foam systems so it is unaffected by hose length, flow rate, or pressures. Whether you are fighting a wildland or structure fire with Class A foam, or fighting a flammable liquid fire with Class B foam, the Hale FoamLogix is up to the task.

Class 1's 5.0 foam system is a flow based foam concentrate proportioning system that uses a field-proven flow sensor assembly to measure actual water flow from the fire pump discharge. The digital input of the flow sensor and the actual output of the positive displacement rotary gear foam concentrate pump are constantly compared and updated by the controller which automatically adjusts the desired foam concentrate rate injected into the discharge. It has full function digital control with push button operation for ease of use. The digital foam system removes the traditional pressure restrictions of other foam systems so it is unaffected by hose length, flow rate, or pressures. Whether you are fighting a wildland or structure fire with Class A foam, or fighting a flammable liquid fire with Class B foam, the Hale FoamLogix is up to the task.

Class 1's 6.5 foam system is a flow based foam concentrate proportioning system that uses a field-proven flow sensor assembly to measure actual water flow from the fire pump discharge. The digital input of the flow sensor and the actual output of the positive displacement rotary gear foam concentrate pump are constantly compared and updated by the controller which automatically adjusts the desired foam concentrate rate injected into the discharge. It has full function digital control with push button operation for ease of use. The digital foam system removes the traditional pressure restrictions of other foam systems so it is unaffected by hose length, flow rate, or pressures. Whether you are fighting a wildland or structure fire with Class A foam, or fighting a flammable liquid fire with Class B foam, the Hale FoamLogix is up to the task.

Hale's EZ-Fill is an easy to operate fixed-mount 12 or 24 volt 5 GPM foam tank refill pump system. EZ-Fill features push-button technology. Just press the “Fill” or “Flush” button for a moment and the unit will cycle either filling the foam concentrate reservoir or running through a flush cycle. The unit is self-priming and will automatically shut off after 60 seconds or when the foam concentrate reservoir is full. The system can be configured to handle either a single or dual tank foam concentrate reservoir system.

SmartCAFS is a Compressed Air Foam System that works smarter for you. Using a Compressed Air Foam System has traditionally been a complex and daunting task with many sequentially specialized steps. Successfully balancing the water pump, foam system, and air system so they work effectively together can be downright frustrating. The days of intimidating CAFS are over.

SmartCAFS executes all of these functions for your operator with a push of a single button and completely simplifies the CAFS procedure. The fully programmable presets allow your department to set CAFS configurations for numerous fire scenarios making it easier than ever to operate a Compressed Air Foam System through a fully integrated touch screen user interface.

The AutoFill is an automatically operating direct booster tank fill valve. It is a popular compressed air foam system accessory that makes water supply management easy. Available in 2-1/2-inch and 3-inch Hale stainless valve sizes, the AutoFill takes the burden off the pump operator in keeping the booster tank full. The AutoFill valve automatically opens when the booster tank level drops to , and then closes itself when the tank is topped off full, when fed with an adequate incoming water supply source. The AutoFill also has a "manual" feature that allows the pump operator to manually operate the valve should conditions require. The water supply inlet for the AutoFill can either be a 2-1/2-inch NST inlet at the pump panel or it can be fed water by a Hale Fill-Thief. With the UV SmartCAFS version the tank is preset to a determined level. The Fill-Thief bolts on the inlet of the Hale Master Intake Valve (MIV) and makes midship pump water supply management easy. The Fill-Thief is an accessory built specifically for users purchasing a midship pump and compressed air foam system combination. When large diameter supply hose (LDH) is connected to the Fill-Thief inlet and the MIV is in the "closed" position, the incoming water is directed to a direct booster tank fill valve. This direct booster tank fill can either be a "manual" valve arrangement or a Hale "AutoFill" automatic direct booster tank fill valve assembly. The benefit of the Fill-Thief is that only one LDH line need be connected to feed both the direct booster tank fill valve, and/or, when the MIV is opened, the midship fire pump. (The FillThief eliminates the need to have two supply lines -- one LDH hose to the fire pump inlet, and one 2-1/2-inch hose to the direct booster tank fill valve inlet -- connected to the apparatus). Note The Fill-Thief fitting extends beyond standard pump house enclosures. On typical installations, the pump panel enclosure is notched and the Fill-Thief fitting is exposed.

SAM is an integrated total water flow control system that manages your truck’s, pump, tank, intakes and discharges. A touch-screen display, provides a simplified interface that totally transforms traditional pump operations. The SAM control system provides complete control of the flow to and from the pump from two interfaces, the SAM control center and the pump controller.

INTRODUCING: The NEW SAM Smart Nozzle with N2P Technology is an option on all new and existing SAM Integrated Total Water Control Systems.

Emergency Responders: Learn more about SAM at samflows.com

OEMs/Dealers: Login to My Account to access system details and support materials.

SmartFOAM is a direct injection foam proportioning system that has been engineered to work smarter for you.

SmartFOAM’s six configurable presets eliminate the need to remember the proper foam injection rate for a specific fire ground scenario. Simply press the preset button with the text indicating your desired scenario. Each preset is fully configurable at the department level so it can be customized for your standard operating procedures.