Fire Pumps
Expert-Made Engine-Mounted & Portable Fire Fighting Pumps
Hale fire pumps - driven by diesel engine or electric motor - provide reliable, high-performing service in a variety of firefighting applications.
Explore our pumps below, or contact us for more information about our fire protection equipment.
-
72 | Qflo Plus
Hale’s Qflo Plus single stage midship pump is lighter than current midship pump designs resulting in lower loads on the chassis. The innovative one-piece body allows easier access to the impeller and mechanical seal, minimizes piping requirements and makes routine maintenance easier. The compact design of the Qflo Plus results in a shorter pump box and increased compartment room for water tanks or personnel.Learn More -
69 | LKA/XKA
Hale’s LKA/XKA split shaft PTO gearbox is a practical, cost-effective alternative to using dedicated engines to power pumps, generators, air compressors, and other auxiliary equipment. It is also the heavy-duty alternative to general purpose power takeoffs that are not built for high speed and high torque characteristics of fire truck and emergency vehicle applications. Installed in a midship position between the two halves of a split driveshaft, the LKA/XKA uses a sliding gear to shift power between the vehicle’s wheels and its own output shaft.Learn More -
70 | MBP Series Firefighting Water Pump
Hale’s MBP series serves as the first line of defense in firefighting. Our pumps work ideally for supply lines, pre-connects, and booster lines. Add these pumps to your fleet of mini-pumpers, first-out units, and tanker/tenders. The MBP can provide flows up to 1300 GPM (4921 L/min) from tank and pressures up to 350 PSI (24.1 Bar).Learn More -
71 | MG
Hale’s MG pump is our most compact midship pump. Designed to fill the gap between a standard attack pump and a full-range midship pump the Lightweight and compact MG pump is built to fit the chassis of most commercially built fire trucks and tankers, “mini,” “midi,” or attack pumpers, field or brush trucks, and mid or full-size tankers.Learn More -
15 | Qtwo
Hale's Qtwo two-stage pump provides unrivaled power and reliability. The Qtwo is based on the Qmax pump, the bestselling single-stage pump in North America. Its strong flow rate knocks down large fires while it high pressure delivery is great for high-rise applications. The Qtwo equipped with an adequate engine can flow over 350 gpm at 600 psi from a 50 psi residual hydrant for excellent high-rise performance.Learn More -
75 | RGA/LGA/MGA
Hale’s RGA/LGA/MGA split shaft PTO gearbox is a practical, cost-effective alternative to using dedicated engines to power pumps, generators, air compressors, and other auxiliary equipment. It is also the heavy-duty alternative to general purpose power takeoffs that are not built for high speed and high torque characteristics of fire truck and emergency vehicle applications. Installed in a midship position between the two halves of a split driveshaft, the RGA/LGA/MGA uses a sliding gear to shift power between the vehicle’s wheels and its own output shaft.Learn More -
76 | RME
Hale’s RME pump is designed specifically for rear mount applications. Designed utilizing a mounting pedestal for ease of installation. The RME pump is a direct drive pump capable of flows in excess of 3000GPM (11,356 L/min).Learn More -
77 | RSD
Hale’s RSD pump is the PTO version of the popular DSD. Ideally suited for ARFF and rear mounted applications. With the ability to produce up to 2000 GPM from hydrant with sufficient Horsepower the RSD brings high performance to the rear mount market. Its compact design and the gearbox and volute options allow for maximum truck design flexibilityLearn More -
78 | TBP
Hale’s TBP Twin Booster pump is a unique two-stage series/parallel pump that meets the demands for higher pump performance for structural fires while still retaining the ability to create the high pressures necessary to operate progressive hose lays and the capability of providing low speed pump and roll. The TBP is the first 750 GPM NFPA rated two stage series/parallel PTO driven fire pump in the market. Capable of 150 GPM (568 L/min) at 500 PSI (34.5 Bar) in pressure mode.Learn More -
67 | CBP Compact PTO Water Pump
Our most compact PTO pump, the CBP water pump is ideally suited for initial attack, booster, and transfer auxiliary pump duty. The space saving, innovative design allows for maximum space for water tank and components. The compact PTO CBP water pump puts heavy duty performance in a lightweight package. Get flows of up to 400 GPM (1500 L/min) and pressures up to 400 psi (27 BAR).Learn More
