Get the most out of your emergency apparatus with firefighting vehicle electronics
Your emergency vehicles are integral to the efficiency and safety of your firefighting team. Hale provides vehicle electronics that are designed to help you simplify emergency scene operations and give you more insight for preventive maintenance. Contact us for more information about our vehicle electronics offering.
Breathing air warning system for aerials, aerial platforms, air trucks and C.F.R. vehicles. Keeps firefighters informed of the percentage of air remaining in a breathing air system from 100% capacity down to zero. A low warning flashes at 25% of maximum air bottle capacity and a 90 dB audible warning sounds at 20% of capacity. The audible alarm can be manually silenced but the visual warning will continue to flash until the air system is filled above the 25% level.
The Class1 Aerial Loading Display is designed to warn aerial operators of dangerous loading conditions when an aerial device is operated at low angles of elevation. Live loads (factors that increase this load such as ice, occupants on the ladder, water load, extra equipment, etc.) are instantly taken into account by the system and displayed to the operator.
The Intelli-Tank™ displays feature wide angle viewing and ultra-bright LED’s for high visibility even in direct sunlight. It is very easy to calibrate.
The ITL-40 Tank Level Gauge features a true 180 degree viewing angle with super bright LED's and built-in diagnostic "text" messages for easy troubleshooting. Available in red, yellow, green, blue and multicolored models. the ITL-40 has a programmable low current output for auto fill systems.
The Class 1 digital flow meter allows operators to monitor actual flow from a discharge line. The compact design reduces pump panel space requirements while providing large, easy to read digits. Eliminates the need for "rules of thumb" or fire ground hydraulics.
The Total System Manager (TSM) is the most versatile electronic system manager available. This fully programmable device is designed to exceed NFPA requirements.
The ES-Key 12 relay board was designed to be used within the ES-Key multiplex system and contains 8 polarity selectable inputs, 10 positive polarity outputs, and 2 selectable polarity outputs. Each of the 12 outputs utilizes an automotive style relay and a 20A thermal fuse.
The Power Distribution Module (PDM) is an ES-Key node designed to allow a designer the ability to utilize the product within the ES-Key electrical system network. The module responds to commands to activate its physical outputs and reports the state of its inputs back to the network.
The 4 light driver module provides 7.5 amps per output (x4) and mimics the function of the Master Tank Level Display. It is used to power the large tank indicator lights on the side of the apparatus. It is compatible with all Class1 ITL and ITL-40 tank gauges.